|
Energy Efficiency > Business > Rapid > Lighting
Click the links below for information on:
> Fluorescent
> High Performance Fluorescent
> Low Watt Fluorescent
> Permanent Lamp Removal
> High-Bay and High Output Replacing HID
> T5 Replacing T12
> Compact Fluorescent
> High Intensity Discharge (HID)
> Other Measures
> Sensors and Controls
> Lighting Printer Friendly Version (PDF)
* Rebates apply only to new equipment being used to replace existing equipment or as part of a retrofit project.
- Rebates are for replacement or retrofit equipment only
- Only complete (lamp + ballast), hard-wired or permanently mounted, UL-listed systems qualify
- T8 ballasts must be < .78 BF (excludes high-bay fixtures)
- Exterior installations do not qualify
|
| Measure |
Rebate |
| Replacing T12 only |
per fixture |
| T8 - 8 foot 1 lamp |
$5.00 |
| T8 - 8 foot 2 lamp |
$7.00 |
| T8 - 4 foot 4 lamp |
$5.00 |
| T8 - 4 foot 3 lamp |
$4.00 |
| T8 - 4 foot 2 lamp |
$2.50 |
| T8 - 4 foot 1 lamp |
$1.50 |
| T8 - 3 foot 4 lamp |
$8.00 |
| T8 - 3 foot 3 lamp |
$5.00 |
| T8 - 3 foot 2 lamp |
$3.00 |
| T8 - 3 foot 1 lamp |
$2.00 |
| T8 - 2 foot 4 lamp |
$5.00 |
| T8 - 2 foot 3 lamp |
$4.00 |
| T8 - 2 foot 2 lamp |
$3.00 |
| T8 - 2 foot 1 lamp |
$2.00 |
|
| High Performance Fluorescent Lighting |
- Rebates are for replacement or retrofit equipment only
- Only complete (lamp + ballast), hard-wired or permanently mounted, UL-listed systems qualify
- HPT8 ballasts must be < .78 BF (excludes high-bay fixtures)
- Exterior installations do not qualify
- Must contain high lumen (>3100 initial lumens), F32T8 lamps.
System must contain CEE certified ballast. Read CEE requirements.
|
| Measure |
Rebate |
Rebate |
| |
Replacing T12 |
Replacing T8 |
| HPT8 - 4 foot 1 lamp |
$6.00 |
$4.00 |
| HPT8 - 4 foot 2 lamp |
$8.00 |
$6.00 |
| HPT8 - 4 foot 3 lamp |
$12.00 |
$10.00 |
| HPT8 - 4 foot 4 lamp |
$16.00 |
$12.00 |
|
| Low Watt Fluorescent Lighting |
- Rebates are for replacement or retrofit equipment only
- Only complete (lamp + ballast), hard-wired or permanently mounted, UL-listed systems qualify
- HPT8 ballasts must be < .78 BF (excludes high-bay fixtures)
- Exterior installations do not qualify
- System must contain CEE certified ballast and lamps of 28W or less. Read CEE requirements.
|
| Measure |
Rebate |
Rebate |
| |
Replacing T12 |
Replacing T8 |
| Low Watt T8 - 4 foot 1 lamp |
$6.50 |
$4.50 |
| Low Watt T8 - 4 foot 2 lamp |
$9.00 |
$7.00 |
| Low Watt T8 - 4 foot 3 lamp |
$13.50 |
$11.50 |
| Low Watt T8 - 4 foot 4 lamp |
$18.00 |
$14.00 |
|
Back to Top
| Permanent Lamp Removal |
- Permanent lamp removal can be claimed if completed project results in a net reduction in the quantity of lamps.
- De-lamping requires removal of T12 lamps/ballasts and unused lampholders from existing fixtures without replacing the lamps.
- The total number of lamps claimed for de-lamping cannot be more than the number of replacement lamps installed.
|
| Measure |
Rebate |
| De-lamping T12 - 2 foot lamp |
$4.00/lamp |
| De-lamping T12 - 3 foot lamp |
$5.00/lamp |
| De-lamping T12 - 4 foot lamp |
$6.00/lamp |
| De-lamping T12 - 8 foot lamp |
$9.00/lamp |
Back to Top
| Measure |
Rebate |
| Replacing HID systems only |
per fixture |
| T8 - High-Bay 4 foot 3 lamp |
$20.00 |
| T8 - High-Bay 4 foot 4 lamp |
$25.00 |
| T8 - High-Bay 4 foot 6 lamp |
$35.00 |
| T8 - High-Bay 4 foot 8 lamp |
$40.00 |
| T8 HO- 8 foot 1 lamp |
$10.00 |
| T8 HO- 8 foot 2 lamp |
$14.00 |
|
| T5 HO - High-Bay 2 lamp |
$30.00 |
| T5 HO - High-Bay 3 lamp |
$40.00 |
| T5 HO - High-Bay 4 lamp |
$50.00 |
| T5 HO - High-Bay 6 lamp |
$60.00 |
| T5 HO - High-Bay 8 lamp |
$75.00 |
|
- Must use high-temp ballasts for T5 HO
|
| Measure |
Rebate |
|
| Replacing T12 only |
per fixture |
| T5 HO - 1 lamp |
$6.00 |
| T5 HO - 2 lamp |
$9.00 |
| T5 HO - 3 lamp |
$11.00 |
| T5 HO - 4 lamp |
$13.00 |
| T5 - 1 lamp |
$5.00 |
| T5 - 2 lamp |
$8.00 |
| T5 - 3 lamp |
$10.00 |
| T5 - 4 lamp |
$12.00 |
|
|
|
Back to Top
- CFLs must be Energy Star rated
|
| Measure |
Rebate |
|
| Replacing incandescent fixtures/bulbs |
per fixture |
|
|
| CFL Pin-Based Fixture |
$20.00/fixture |
| CFL Screw In Bulb up to 32 Watss |
$2.00/bulb |
| CFL Screw In Bulb > 32 Watts |
$5.00/bulb |
Back to Top
- Must use an electronic ballast and pulse-start metal halide (PSMH) or ceramic metal halide (CMH) lamp
- Screw-in retrofit lamps and exterior fixtures are not applicable
|
| Measure |
Rebate |
|
per fixture |
| Pulse-Start or Ceramic Metal-Halide 0-100 watts |
$35.00 |
| Pulse-Start or Ceramic Metal-Halide 100-250 watts |
$40.00 |
| Pulse-Start or Ceramic Metal-Halide > 250 watts |
$50.00 |
| Metal-Halide Track Lighting |
$75.00 |
| Measure |
Rebate |
|
per sign |
| LED Traffic Signal — Red |
$25.00 |
| LED Traffic Signal — Green |
$50.00 |
| LED Pedestrian Don't Walk Sign |
$25.00 |
| LED Exit Signs |
$5.00 |
- All sensors must control a minimum of 125 watts
- The control system must turn off at least half of the lamps in the fixture, or must provide for continuous or step (bi-level) dimming
- Rebates apply to only one lighting control per space being controlled
- Maximum rebate of $2,500 for each type of lighting control
- Occupancy sensors must be passive infrared (PIR) and/or ultrasonic
- Sensors must use programmable rapid start ballasts
|
| Measure |
Rebate |
| Ceiling-Mounted Occupancy Sensor |
$30.00/sensor |
| Wall- or Fixture-Mounted Occupancy Sensor |
$15.00/sensor |
| Remote-Mounted Daylight Dimming Sensor |
$60.00/sensor |
| Fixture-Mounted Daylight Dimming Sensor |
$30.00/sensor |
| Dimmable Ballast for Use with Daylight Sensors |
$40.00/ballast |
| Central Lighting Control |
$0.04/connected watt |
| Switching Controls for Multilevel Lighting |
$0.04/connected watt |
|
